首页

GAR Electroforming Microfinish Surface Comparators

k彩平台登陆GAR Electroforming Microfinish Surface Comparators

GAR Electroforming Microfinish Surface Comparators

Microfinish Comparator Surface Roughness Scales provide the industry with established flat surface roughness specimens for visual and tactual comparison. They are used in specifying and controlling surface roughness when comparison and evaluation to a product having the appearance of typically machined surfaces are required.

Place the Microfinish Comparator Surface Roughness Scale next to your work piece. Slide the scale so that the rectangle with the surface roughness you want is adjacent to the piece you are examining. Compare by drawing the tip of the fingernail across each surface at right angles to the tool mark. The feel of the fingernail contact must be the same if the finishes are identical.


k彩平台登陆C-9 GAR Cast Microfinish Comparator, Nine specimens: Cast surface finish

C-9 GAR Cast Microfinish Comparator, Nine specimens: Cast surface finish

The C-9 comparator provides 9 replicated cast surface finish specimens ranging from 20 to 900 m..

$78.00

k彩平台登陆E-9 Electrical Discharge Machined Microfinish Comparator (EDM)

E-9 Electrical Discharge Machined Microfinish Comparator (EDM)

Nine replicated EDM surface finish specimens ranging from 16 to 250 microinches. There is a require..

$49.00

k彩平台登陆G-4 GAR PAK Kit, Four Specimens: Machined, grit-blasted, shot-blasted and electrical discharge machined (EDM) surfaces

G-4 GAR PAK Kit, Four Specimens: Machined, grit-blasted, shot-blasted and electrical discharge machined (EDM) surfaces

Contains four individual roughness scales that include replicated surface finish specimens of machin..

$200.00

k彩平台登陆G-6 GAR Grit-Blast Microfinish Comparator, 6 Specimens: grit-blasted surface finish

G-6 GAR Grit-Blast Microfinish Comparator, 6 Specimens: grit-blasted surface finish

Six replicated grit-blasted surface finish specimens ranging from 32 to 1000 microinches. Please ca..

$49.00

k彩平台登陆G-60 GAR Conventional Machining Microfinish Comparator, 12 Specimens: lapped, ground, profiled, shape-turned and milled surface finish

G-60 GAR Conventional Machining Microfinish Comparator, 12 Specimens: lapped, ground, profiled, shape-turned and milled surface finish

Contains 12 replicated machined surface finish specimens with examples of five different machining p..

$78.00

k彩平台登陆G-61 GAR Conventional Machining Microfinish Comparator, 12 Specimens: Shape-turn, ground, profiled and milled surface finish

G-61 GAR Conventional Machining Microfinish Comparator, 12 Specimens: Shape-turn, ground, profiled and milled surface finish

Twelve replicated machined surface finish specimens with examples of four different machining proces..

$78.00

k彩平台登陆G-62 GAR Conventional Machining Microfinish Comparator, 10 Specimens: Ground surface finish

G-62 GAR Conventional Machining Microfinish Comparator, 10 Specimens: Ground surface finish

Ten replicated ground surface finish specimens: Five shown as inside  diameter (I.D.) and five ..

$78.00

k彩平台登陆G-63 GAR Conventional Machining Microfinish Comparator, 10 Specimens: Turn surface finish

G-63 GAR Conventional Machining Microfinish Comparator, 10 Specimens: Turn surface finish

Ten replicated turn surface finish specimens: Five shown as inside  diameter (I.D.) and five sh..

$78.00

k彩平台登陆M-15 GAR Master Set: Eight individual blocks with fifteen replicated machined surfaces

M-15 GAR Master Set: Eight individual blocks with fifteen replicated machined surfaces

Eight individual blocks with fifteen replicated machined surfaces from 2 to 125 microinches. The..

$270.00

k彩平台登陆PRS GAR Precision Reference Standard

PRS GAR Precision Reference Standard

The GAR #PRS Precision Reference Standard provides an economical calibration tool which permits the ..

$174.00

k彩平台登陆PRS-3 GAR 3 Patch Precision Reference Standard

PRS-3 GAR 3 Patch Precision Reference Standard

The GAR PRS-3 Precision Reference Standard provides an economical calibration tool which permits t..

$290.00 $295.00

k彩平台登陆S-22 GAR Microfinish Surface Roughness Comparator, Twenty Two Specimens: Lapped, ground, blanchard ground, shape-turned, milled and profiled

S-22 GAR Microfinish Surface Roughness Comparator, Twenty Two Specimens: Lapped, ground, blanchard ground, shape-turned, milled and profiled

Twenty-two replicated machined surface finish specimens with examples of six different machining pro..

$72.00

k彩平台登陆SH-6 GAR Shot-Blast Microfinish Comparator, Six Specimens, Shot-blasted surface finish

SH-6 GAR Shot-Blast Microfinish Comparator, Six Specimens, Shot-blasted surface finish

Six replicated shot-blasted surface finish specimens ranging from 32 to 1000 microinches. There is ..

$49.00

Showing 1 to 13 of 13 (1 Pages)